Trusted spray foam roofing & insulation services for Melbourne, FL property owners. Licensed, insured, and backed by manufacturer warranties.
From SPF roof installation to attic insulation, Lapolla Industries covers every spray foam need in Melbourne.
Protect your roofing investment with a maintenance program designed for your specific roof type. Our crews document every visit with photos and condition ratings so you always know the exact state of your roof.
Spray foam roofs are built to last, but they do need occasional repair. Our crews fix bird pecks, foot traffic damage, hail impacts, and coating wear — extending the life of your SPF system without a costly full recoat.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Precision leak detection and permanent repair for active roof leaks. We use infrared moisture scanning and visual inspection to trace the leak to its source, then apply a lasting fix — not a band-aid — so it never comes back.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Flat roofs fail at seams, flashings, and penetrations. Our crews specialize in diagnosing and repairing these critical failure points using spray foam, liquid-applied membranes, and targeted coating systems that outlast conventional patch repairs.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
Roof restoration saves 50 to 70 percent compared to full replacement while delivering equivalent performance. Our SPF and coating systems seal every seam, add insulation value, and provide a reflective finish that cuts cooling costs.
Attic insulation with spray foam delivers the highest R-value per inch and eliminates the air infiltration that accounts for up to 40 percent of your home energy waste. Our crews install cleanly and efficiently — in and out in one day.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Spray foam insulation for crawl space walls, rim joists, and band boards that eliminates moisture, cold floors, and musty odors. Closed-cell foam acts as both insulation and vapor barrier in a single application.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
In Melbourne, FL, Lapolla Industries handles the full range of spray foam projects that a city of 88,801 residents demands — from residential attic insulation to commercial roof restoration on 100,000-plus-square-foot facilities. Our crews are factory-trained on the latest SPF equipment and materials, and our project managers have the experience to coordinate complex multi-phase commercial installations.
The commercial buildings that define Melbourne skylines and business districts rely on roofing systems that perform. Lapolla Industries has restored and re-roofed hundreds of commercial facilities with spray foam systems that outperform conventional membranes in every measurable category — thermal performance, moisture resistance, wind uplift, and service life. Contact us at (866) 605-0362 for a facility assessment.
Here is what sets Lapolla Industries apart from other contractors in Melbourne.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
No hidden fees, no surprise charges. You receive a detailed written estimate before we start and the final invoice matches — guaranteed. Every line item explained.
Storms do not wait and neither do we. Our emergency crews are on call around the clock to tarp, secure, and protect your property when you need it most.
Common questions about spray foam roofing and insulation in Melbourne, FL.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Melbourne crews evaluate the existing substrate to ensure it is structurally sound before application.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Melbourne homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
Spray foam is one of the best solutions for flat and low-slope roofs in Melbourne. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Yes. Every Melbourne crew is fully licensed, bonded, and insured for spray foam roofing and insulation work. We carry general liability and workers compensation coverage on every project. You can request proof of insurance before any work begins.
Closed-cell foam is denser, provides a higher R-value per inch (R-6.5 vs R-3.7), and acts as a vapor and moisture barrier. Open-cell foam is lighter, more flexible, and more affordable. For roofing applications in Melbourne we typically recommend closed-cell for its waterproofing properties. For interior wall insulation, either type may be appropriate.
If your commercial roof in Melbourne is structurally sound but showing surface deterioration — cracked coatings, minor leaks, UV damage — restoration with SPF and a new coating system is likely the better investment. If there is widespread substrate damage, saturated insulation, or structural concerns, full replacement may be necessary. Our inspection will determine which option is right.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Lapolla Industries insulated our crawl space with spray foam and encapsulated the entire area. No more cold floors in winter, no more musty smell. The crew worked in tight quarters and did an excellent job. Very impressed."
"We had a persistent leak that three different contractors could not find. Their team used moisture scanning equipment and pinpointed it to a failed pipe boot in minutes. Fixed it the same day. Incredible diagnostic work."
"They sprayed closed-cell foam in our attic and the difference was immediate. Our upstairs bedrooms are finally comfortable year-round and our heating bill dropped by about thirty percent. The crew was in and out in one day."
Lapolla Industries proudly serves property owners in these cities near Melbourne.